Continuous Emission Monitoring System for Flue Gas HCl Co Waste Incineration CEMS Gas Analyzers

WT Online Gas Monitoring System

1. Basic Design Principle of the WT-400 Analysis System
The WT-400 Ammonia Analysis System adopts a high-temperature extractive monitoring method, with a laser-based NH₃ analyzer as the core unit. All gas-contacting components are heated and insulated to above 180℃ throughout the sampling path, ensuring stable and accurate NH₃ measurements even under challenging process conditions.

2. Operating Conditions and Requirements

2.1 General Process Conditions

• Maximum dust concentration: < 2000 g/Nm³

• Flue gas temperature at the sampling point: ≤ 600℃

• Sampling point pressure: -15 to 15 MPa

• Tar and benzene content: < 10 g/Nm³

• Presence of saturated water vapor

2.2 Environmental Conditions

• Temperature control cabinet installed outdoors; analyzer unit installed indoors

• Ambient temperature: 5–45℃

• Relative humidity: 20–85% RH

• Atmospheric pressure: 10–106 kPa (depending on site location)

2.3 Utilities and Gas Supply

• Power Supply: 220V ±10%, 50Hz ±1Hz; Power consumption: 5 kVA; free from strong electrical interference

• Compressed Air: For purging the sampling system to prevent clogging; must be clean, dry, oil-free, with a pressure of 4–7 kg/cm² to ensure effective cleaning

• Standard Gas: For system preprocessing, calibration, and performance verification; must meet the specified purity requirements to maintain measurement accuracy

• No.	Standard Gas Compositions	Standard Gas Concentration	Standard Gas Pressure
  1	N2	≥ 99.9999%	0.5 -10 MPa
  2	NH3	80% of the measurement rage	0.5 -10 MPa

3. Features of the WTKF200 Ammonia Escape Online Monitoring System

1. Integrated Sampling Probe – Compact, streamlined design with large dust holding capacity; supports dust filtration up to ≤ 100 g/Nm³ without clogging.

2. High Filtration Precision – Dust filtration accuracy ＜ 0.1 μm.

3. High Measurement Accuracy – Analysis accuracy of ±1% FS.

4. Fast Response – Response time (T90) ≤ 30 s.

5. High Reliability – Mean Time Between Failures (MTBF) > 3 years.

6. Low Maintenance – Maintenance interval exceeds 1 year.

7. Distortion-Free Sampling – High-temperature extractive sampling method ensures accurate, representative measurements.

8. Temperature-Controlled Sampling – High-temperature, constant-temperature design maintains NH₃ measurement accuracy.

9. Automatic Purging – Built-in automatic cleaning system removes dust and prevents blockages.

10. Signal Output – 4–20 mA output; control alarm signal NO/NC, 1A/220V.

We offer fully customized gas online monitoring solutions tailored to the customer’s unique requirements and operating environments, ensuring optimal performance and measurement accuracy.

HCl Continuous Emission Monitoring System

HCl CEMS Gas Analyzers

Waste Incineration CEMS

Continuous Emission Monitoring System for Flue Gas HCl Co Waste Incineration CEMS Gas Analyzers Images